Find Out About Your Memphis, TN Septic Distribution Box

A regular onsite septic system is comprised of 3 principal items. The number one stop for waste directly from the house is the biggest part and is termed a septic tank. Here, the waste is deposited while at the same time it separates into 3 layers. The middle layer is liquid effluent, which in turn will advance to the second important container piece. This one is called a distribution box, given that it routes as well as delivers the effluent flow to various field locations. This will be the next and last unit. This region is just where the liquid is accumulated until it is soaked up within the surrounding ground.

 New leach field installation
The purpose of the distribution box is to steer the drainage coming from the septic tank such that each objective gets a corresponding quantity of waste. Doing this is brought about from accurate position of the exit lines into and coming from this container. Very thorough planning and building and construction is definitely called for to produce the appropriate pipeline depth which will sustain a consistent and even drain to the various sewer field sections.


Ideally, an accurate device named a transit level will be used to place and also be a foundation for each and every section of pipe exiting the distribution box. In addition, other types of strong pipe reinforcement devices will help keep the drainpipe in position as backfill is added to cover up the system. Any carelessness in this structure will definitely cause flow concerns later on.

 Installing a new D-box

The sewer system utilized intended for the distribution box and related drain field movement is smaller in size in comparison to pipes that are chosen for the sewage-disposal tank. They are certainly just not meant to transport solids and many other substances that could indeed lead to a clog. In cases where these solids and larger substances flow out of the storage tank into the D-box, they will certainly cause a reduction in outflow or even an obstruction. The end outcome will probably be a septic system that will likely cease to work properly.


A D-box is actually much smaller in size compared to the waste storage tank. This makes the box more difficult to find on your property. The smaller over all size area will also tend to block quicker with any solids that get out of the much larger in size storage tank. It is certainly important that the septic tank be pumped at appropriate intervals so that solids do not reach a level high enough to progress to the D-box.


In case the D-box is causing a blockage of flow created by solids or other objects, it really definitely will need to be inspected and cleaned to deliver the appropriate dispersal and outflow of liquids. This will probably require much more invasive quantity of digging and excavation, together with corresponding steep repair service costs.


Renovating or even replacing the drain field is usually a very costly amount of effort. Oftentimes the drain field will need to be relocated to a different area, which in turn might possibly require an effluent pump in the case that there is no area that is at the comparable elevation such as before. This particular kind of repair work will likely incur an expense of thousands of dollars.


To increase the lifespan of your septic system, make sure to adhere to the do’s and do n’ts just as contained in the web site reports and posts. Bear in mind, exactly what anyone put into the tank is going to help make a significant difference with regard to the quantity of obstructions along with the associated costs to repair.

D-box badly clogged

Drain Field D-box badly clogged

New distribution box

Replacement D-box underway