Find Out About Your Asheville, NC Septic Distribution Box

A standard onsite septic system is composed by containing three major items. The 1st stop for waste from your home is actually the largest unit and is referred to as a septic tank. Here, the waste products are held while they settle into three layers.

On top is a layer of waste material that floats to the top, such as grease and oil type materials.  The lowest level will be a collection of solid waste. The mid layer will be liquid effluent that should advance to the second important major item.

This is actually called a distribution box, given that it collects and directs the outflow liquid solution to multiple leach field areas. This major item composes a drain field, the 3rd and final component. These drain field areas are where the liquid reaches its final stage. There it is absorbed within the surrounding ground.

New drain field installationThe role of the distribution box is to steer the effluent coming from the septic tank such that each field pipeline receives a corresponding amount of waste product. Precise location of the d-box exit lines from this box is required for the system to operate properly.

Very careful planning and construction is required to present the correct drain line drop, which will maintain a uniform, gradual flow throughout each branch of the drain field.

Ideally, an accurate and precise measurement tool, referred to as a transit level, will be chosen in order to place and support every segment of pipeline going out of the distribution box. Other tough pipe reinforcement devices will help keep the pipe in place as backfill is filled in over the structure. Any kind of negligence with this step of the installation will result in flow obstacles ahead.

The pipeline system utilized for the distribution box and associated sewer and drain field flow is smaller in size compared to pipelines which are chosen for the septic tank. They are just not meant to transport solids and other substances, which could result in a blockage. Anytime these solids and larger elements move out of the tank into the D-box, they will create a decline of outflow or even an obstruction. The end outcome will likely be a septic system which will cease to work correctly.

A D-box is actually a lot smaller in comparison to the waste product tank. This causes the box more difficult to find on your property. The smaller size area will perhaps even tend to stop up sooner with any solids that get out of the much bigger storage tank. It is important that the septic tank be pumped at established time periods so that solids do not make it to a level high enough to transfer to the D-box.

When the D-box is creating a blockage of progress created by solids or other objects, it will need to be inspected and cleaned to provide the proper dispersal and flow of liquids. This will probably involve an invasive amount of digging and excavation, along with related high repair work costs.

Repairing or replacing the drain field is a very costly amount of labor. Oftentimes the drain field will have to be relocated to a different location, which in turn might possibly require an effluent pump if there is absolutely no location that is at the same level as before, which would be an uphill grade from the septic tank. This sort of replacement will likely incur an expense into the thousands of dollars.

To lengthen the lifespan pertaining to your septic system, make sure to abide by the do’s and don’ts just as detailed within the website reports and blogs. Remember, what is put inside the tank will definitely make a significant impact with regard to how quick a blockage will occur and also the associated costs to repair.

 

 

D-box badly clogged

Drain Field D-box badly clogged

New distribution box

Replacement D-box underway